Canopy swing – Replacing a canopy on an outdoor swing can be a little difficult, but sometimes it is necessary to do. Every year in spring and summer storms destroy canopy on these swings, and they can be expensive to replace. The smart consumer would make a removable cover that is removed during these powerful storms, so that the canopy is spared. This article is based on replacing a canopy on a two-seater swing, but you can change it to find greater fluctuations and
Remove the old canopy swing, and measuring the length and width. You must add six inches in length. Go to your local drug store or department store that has subjects department, and buy material, and a heavy duty fabric, make sure liner fits your material some . The fabric must be the same length as the material, but not so wide, so make sure it is at least a two inch difference with cloth is less than the material.
12 Photos Gallery of: Outdoor Canopy Swing
Carefully lift the fabric of the material needed. Squeeze liquid glue on the material and smooth the fabric over the top. Place books or blocks of hard wood on top cloth and let it dry. Add the material of the frame and stand under the frame and material. Fold under the portion of the material over hangs over the canopy swing. Mark the location where the edge of the fabric touches the other area of fabric. Sew or use liquid glue to apply hook and loop tape to the edges of the material and the other side of the fabric where you marked it. Add the canopy over the frame and hook it in place.